Home>mall>Electronics

DIY Portable Battery Storage Spot Welding Machine PCB Circuit Board Welding Equipment Spot Welders for 18650 26650 12V

4.0369
$10.76 / $13.13
  • *Name:

  • *Email:

  • *Phone:

  • *Quantity:

  • *Content:

  • Attachment:

    Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$6.76 / $13.13
Shipping to: United States | Express delivery: 7-12 business days | Standard delivery: 15-25 business days

ਸੁਰੱਖਿਅਤ ਭੁਗਤਾਨ ਦੀ ਗਾਰੰਟੀ

ਮੁਫ਼ਤ ਤੋਹਫ਼ਾ
ਕਿਸੇ ਵੀ ਖਰੀਦ ਨਾਲ ਮੁਫ਼ਤ ਤੋਹਫ਼ਾ
ਸ਼ਿਪਿੰਗ ਨੀਤੀ
$9.9 ਤੋਂ ਵੱਧ ਦੇ ਆਰਡਰਾਂ ਲਈ ਮੁਫ਼ਤ ਸਟੈਂਡਰਡ ਸ਼ਿਪਿੰਗ
ਰਿਟਰਨ ਨੀਤੀ
ਵਾਪਸੀ ਆਈਟਮਾਂ ਨੂੰ 40 ਦਿਨਾਂ ਦੇ ਅੰਦਰ ਸਵੀਕਾਰ ਕੀਤਾ ਜਾਵੇਗਾ ਜਦੋਂ ਮਾਲ ਪ੍ਰਾਪਤ ਕਰਨ ਦੀ ਤਾਰੀਖ ਹੈ। ਕਸਟਮਾਈਜ਼ਡ ਆਈਟਮਾਂ ਨੂੰ ਵਾਪਸ ਜਾਂ ਬਦਲਿਆ ਨਹੀਂ ਜਾ ਸਕਦਾ। ਈ-ਗਿਫਟ ਕਾਰਡ ਨਾਲ ਖਰੀਦੇ ਗਏ ਆਈਟਮਾਂ ਨੂੰ ਕੇਵਲ ਬਦਲਿਆ ਜਾ ਸਕਦਾ ਹੈ; ਰਿਫੰਡ ਲਾਗੂ ਨਹੀਂ ਹੁੰਦੇ।

ਮੁਫ਼ਤ ਤੋਹਫ਼ਾ

Roymall ਵਿੱਚ ਤੁਹਾਡਾ ਸਵਾਗਤ ਹੈ, ਪ੍ਰੀਮੀਅਮ ਡਿਪਾਰਟਮੈਂਟ ਸਟੋਰ ਤੋਹਫ਼ੇ ਖਰੀਦਣ ਲਈ ਤੁਹਾਡੀ ਪੇਸ਼ੇਵਰ ਵੈੱਬਸਾਈਟ। ਅਸੀਂ ਤੁਹਾਡੇ ਸਹਿਯੋਗ ਨੂੰ ਬਹੁਤ ਮਹੱਤਵ ਦਿੰਦੇ ਹਾਂ ਅਤੇ ਸਤਿਕਾਰ ਕਰਦੇ ਹਾਂ, ਅਤੇ ਅਸੀਂ ਤੁਹਾਡੀਆਂ ਖਰੀਦਦਾਰੀਆਂ ਵਿੱਚ ਇੱਕ ਵਾਧੂ ਖੁਸ਼ੀ ਜੋੜ ਕੇ ਤੁਹਾਡਾ ਧੰਨਵਾਦ ਕਰਨਾ ਚਾਹੁੰਦੇ ਹਾਂ। ਜਦੋਂ ਤੁਸੀਂ ਸਾਡੇ ਨਾਲ ਖਰੀਦਦਾਰੀ ਕਰਦੇ ਹੋ, ਤਾਂ ਤੁਸੀਂ ਨਾ ਸਿਰਫ਼ ਉੱਚ-ਗੁਣਵੱਤਾ ਵਾਲੇ ਉਤਪਾਦਾਂ ਦਾ ਆਨੰਦ ਲੈਂਦੇ ਹੋ ਜੋ ਤੁਹਾਡੀ ਜੀਵਨ ਸ਼ੈਲੀ ਨੂੰ ਵਧਾਉਂਦੇ ਹਨ, ਬਲਕਿ ਤੁਸੀਂ ਹਰ ਆਰਡਰ ਨਾਲ ਇੱਕ ਵਿਲੱਖਣ ਮੁਫ਼ਤ ਤੋਹਫ਼ਾ ਵੀ ਪ੍ਰਾਪਤ ਕਰੋਗੇ ਜੋ ਤੁਸੀਂ ਦੇਵੋਗੇ। ਸਾਡੇ ਸੰਗ੍ਰਹਿ ਦੀ ਖੋਜ ਕਰਨ ਅਤੇ ਤੁਹਾਡੇ ਸਹੀ ਤੋਹਫ਼ੇ ਲੱਭਣ ਲਈ ਤਿਆਰ ਹੋ? ਪ੍ਰੀਮੀਅਮ ਡਿਪਾਰਟਮੈਂਟ ਸਟੋਰ ਆਈਟਮਾਂ ਦੀ ਸਾਡੀ ਚੋਣ ਦੀ ਖੋਜ ਕਰੋ, ਆਪਣਾ ਆਰਡਰ ਦਿਓ, ਅਤੇ ਆਪਣੀ ਖਰੀਦਦਾਰੀ ਦੇ ਨਾਲ ਆਉਣ ਵਾਲੇ ਮੁਫ਼ਤ ਤੋਹਫ਼ੇ ਦੀ ਖੁਸ਼ੀ ਦੀ ਉਡੀਕ ਕਰੋ।

ਸ਼ਿਪਿੰਗ ਨੀਤੀ

ਅਸੀਂ ਤੁਹਾਡੇ ਆਰਡਰ ਪ੍ਰਾਪਤ ਕਰਨ ਤੋਂ ਬਾਅਦ ਤੁਹਾਡੇ ਕੋਲ ਆਈਟਮਾਂ ਨੂੰ ਭੇਜਣ ਲਈ ਸਖ਼ਤ ਮਿਹਨਤ ਕਰਾਂਗੇ ਅਤੇ ਇਹ ਯਕੀਨੀ ਬਣਾਵਾਂਗੇ ਕਿ ਉਹ ਸੁਰੱਖਿਅਤ ਢੰਗ ਨਾਲ ਪਹੁੰਚਦੇ ਹਨ। ਸ਼ਿਪਿੰਗ ਦੇ ਵੇਰਵੇ ਤੁਹਾਡੀ ਪੁਸ਼ਟੀਕਰਨ ਈਮੇਲ ਵਿੱਚ ਪ੍ਰਦਾਨ ਕੀਤੇ ਜਾਣਗੇ।ਜ਼ਿਆਦਾਤਰ ਮਾਮਲਿਆਂ ਵਿੱਚ, ਆਰਡਰ 2 ਦਿਨਾਂ ਦੇ ਅੰਦਰ ਪ੍ਰੋਸੈਸ ਕੀਤੇ ਜਾਂਦੇ ਹਨ।ਖਾਸ ਹਾਲਤਾਂ ਵਿੱਚ, ਇਹ ਹੇਠ ਲਿਖੇ ਅਨੁਸਾਰ ਦੇਰੀ ਹੋਵੇਗੀ: ਜਦੋਂ ਤੁਸੀਂ ਸ਼ਨੀਵਾਰ, ਐਤਵਾਰ ਜਾਂ ਜਨਤਕ ਛੁੱਟੀਆਂ 'ਤੇ ਆਰਡਰ ਦਿੰਦੇ ਹੋ, ਤਾਂ ਇਹ 2 ਦਿਨਾਂ ਲਈ ਦੇਰੀ ਹੋਵੇਗੀ।ਆਮ ਤੌਰ 'ਤੇ, ਇਸ ਨੂੰ 5-7 ਕੰਮਕਾਜੀ ਦਿਨਾਂ (ਸੋਮਵਾਰ ਤੋਂ ਸ਼ੁੱਕਰਵਾਰ) ਦੀ ਲੋੜ ਹੁੰਦੀ ਹੈ ਜੇਕਰ ਫਲਾਈਟ ਦੇਰੀ ਜਾਂ ਹੋਰ ਵਾਤਾਵਰਣਕ ਕਾਰਕਾਂ ਦੁਆਰਾ ਪ੍ਰਭਾਵਿਤ ਨਾ ਹੋਵੇ।ਕਿਉਂਕਿ ਸਾਡੀ ਸ਼ਿਪਿੰਗ ਸੇਵਾ ਵਿਸ਼ਵਵਿਆਪੀ ਹੈ, ਇਸ ਲਈ ਸ਼ਿਪਿੰਗ ਦੇ ਸਮੇਂ ਤੁਹਾਡੇ ਸਥਾਨ 'ਤੇ ਨਿਰਭਰ ਕਰਨਗੇ, ਇਸ ਲਈ ਜੇਕਰ ਤੁਸੀਂ ਦੂਰ-ਦੁਰਾਡੇ ਜ਼ਿਲ੍ਹਿਆਂ ਜਾਂ ਦੇਸ਼ਾਂ ਵਿੱਚ ਹੋ ਤਾਂ ਇਸ ਨੂੰ ਕੁਝ ਸਮਾਂ ਲੱਗ ਸਕਦਾ ਹੈ ਅਤੇ ਕਿਰਪਾ ਕਰਕੇ ਧੀਰਜ ਨਾਲ ਉਡੀਕ ਕਰੋ।

1. ਵਾਪਸੀ ਅਤੇ ਵਟਾਂਦਰਾ ਨੀਤੀ

ਅਸੀਂ ਸਿਰਫ਼ roymall.com ਤੋਂ ਖਰੀਦੇ ਗਏ ਆਈਟਮਾਂ ਨੂੰ ਸਵੀਕਾਰ ਕਰਦੇ ਹਾਂ। ਜੇਕਰ ਤੁਸੀਂ ਸਾਡੇ ਸਥਾਨਕ ਵੰਡਕਾਰਾਂ ਜਾਂ ਹੋਰ ਖੁਦਰਾਤ ਵਿਕਰੇਤਾਵਾਂ ਤੋਂ ਖਰੀਦਦਾਰੀ ਕਰਦੇ ਹੋ, ਤਾਂ ਤੁਸੀਂ ਉਨ੍ਹਾਂ ਨੂੰ ਸਾਡੇ ਪਾਸੇ ਵਾਪਸ ਨਹੀਂ ਕਰ ਸਕਦੇ। ਅੰਤਿਮ ਵਿਕਰੀ ਆਈਟਮਾਂ ਜਾਂ ਮੁਫ਼ਤ ਤੋਹਫ਼ਿਆਂ ਨੂੰ ਵਾਪਸੀ ਲਈ ਸਵੀਕਾਰ ਨਹੀਂ ਕੀਤਾ ਜਾਂਦਾ। ਵਾਪਸੀ ਲਈ ਯੋਗ ਹੋਣ ਲਈ, ਤੁਹਾਡੀ ਆਈਟਮ ਨੂੰ ਵਰਤਿਆ ਨਹੀਂ ਜਾਣਾ ਚਾਹੀਦਾ ਅਤੇ ਉਸੇ ਹਾਲਤ ਵਿੱਚ ਹੋਣਾ ਚਾਹੀਦਾ ਹੈ ਜਿਸ ਵਿੱਚ ਤੁਸੀਂ ਇਸਨੂੰ ਪ੍ਰਾਪਤ ਕੀਤਾ ਸੀ। ਇਹ ਮੂਲ ਪੈਕੇਜਿੰਗ ਵਿੱਚ ਵੀ ਹੋਣਾ ਚਾਹੀਦਾ ਹੈ।ਸਾਡੇ ਤੋਂ ਵਾਪਸੀ ਦੀਆਂ ਹਦਾਇਤਾਂ ਪ੍ਰਾਪਤ ਕਰਨ ਤੋਂ ਬਾਅਦ, ਕਿਰਪਾ ਕਰਕੇ ਆਪਣੀਆਂ ਵਾਪਸ ਕੀਤੀਆਂ ਆਈਟਮਾਂ ਨੂੰ ਪੈਕ ਕਰੋ ਅਤੇ ਆਪਣੇ ਪੈਕੇਜ ਨੂੰ ਸਥਾਨਕ ਪੋਸਟ ਆਫਿਸ ਜਾਂ ਹੋਰ ਕੋਰੀਅਰ 'ਤੇ ਛੱਡ ਦਿਓ。
ਅਸੀਂ ਤੁਹਾਡੀ ਵਾਪਸੀ ਜਾਂ ਵਟਾਂਦਰਾ ਆਈਟਮ ਨੂੰ 3-5 ਕੰਮਕਾਜੀ ਦਿਨਾਂ ਦੇ ਅੰਦਰ ਪ੍ਰੋਸੈਸ ਕਰਾਂਗੇ ਜਦੋਂ ਅਸੀਂ ਇਸਨੂੰ ਪ੍ਰਾਪਤ ਕਰਦੇ ਹਾਂ। ਰਿਫੰਡ ਤੁਹਾਡੀ ਭੁਗਤਾਨ ਦੀ ਮੂਲ ਵਿਧੀ ਨੂੰ ਆਟੋਮੈਟਿਕ ਤੌਰ 'ਤੇ ਪ੍ਰੋਸੈਸ ਅਤੇ ਕ੍ਰੈਡਿਟ ਕੀਤਾ ਜਾਵੇਗਾ।ਕੋਈ ਵਾਪਸੀ ਜਾਂ ਵਟਾਂਦਰਾ ਸਵੀਕਾਰ ਨਹੀਂ ਕੀਤਾ ਜਾ ਸਕਦਾ ਜੇਕਰ ਉਤਪਾਦ ਕਸਟਮ ਬਣਾਇਆ ਗਿਆ ਸੀ, ਜਿਸ ਵਿੱਚ ਕਸਟਮ ਆਕਾਰ, ਕਸਟਮ ਰੰਗ, ਜਾਂ ਕਸਟਮ ਪ੍ਰਿੰਟ ਕੀਤਾ ਗਿਆ ਸ਼ਾਮਲ ਹੈ।ਹੋਰ ਮਦਦ ਦੀ ਲੋੜ ਹੈ, ਕਿਰਪਾ ਕਰਕੇ ਸਾਡੇ ਨਾਲ ਸੰਪਰਕ ਕਰੋ। service@roymall.com ਜਾਂ Whatsapp: +8619359849471

2.ਰਿਫੰਡ ਨੀਤੀ

ਜਦੋਂ ਅਸੀਂ ਵਾਪਸ ਕੀਤੇ ਗਏ ਪੈਕੇਜ ਨੂੰ ਪ੍ਰਾਪਤ ਕਰਦੇ ਹਾਂ ਅਤੇ ਇਸਦੀ ਜਾਂਚ ਕਰਦੇ ਹਾਂ ਤਾਂ ਤੁਹਾਨੂੰ ਪੂਰਾ ਰਿਫੰਡ ਜਾਂ 100% ਸਟੋਰ ਕ੍ਰੈਡਿਟ ਮਿਲੇਗਾ। ਰਿਫੰਡ ਤੁਹਾਡੀ ਭੁਗਤਾਨ ਦੀ ਮੂਲ ਵਿਧੀ ਨੂੰ ਆਟੋਮੈਟਿਕ ਤੌਰ 'ਤੇ ਪ੍ਰੋਸੈਸ ਅਤੇ ਕ੍ਰੈਡਿਟ ਕੀਤਾ ਜਾਵੇਗਾ। ਕਿਰਪਾ ਕਰਕੇ ਧਿਆਨ ਦਿਓ ਕਿ ਸ਼ਿਪਿੰਗ ਖਰਚੇ ਅਤੇ ਕੋਈ ਵੀ ਡਿਊਟੀ ਜਾਂ ਫੀਸ ਵਾਪਸ ਨਹੀਂ ਕੀਤੀ ਜਾਂਦੀ। ਵਾਧੂ ਸ਼ਿਪਿੰਗ ਖਰਚੇ ਵਾਪਸ ਨਹੀਂ ਕੀਤੇ ਜਾਂਦੇ ਜਦੋਂ ਪੈਕੇਜ ਭੇਜਿਆ ਜਾਂਦਾ ਹੈ। ਤੁਸੀਂ ਇਹਨਾਂ ਫੀਸਾਂ ਨੂੰ ਅਦਾ ਕਰਨ ਲਈ ਜ਼ਿੰਮੇਵਾਰ ਹੋ ਅਤੇ ਅਸੀਂ ਉਹਨਾਂ ਨੂੰ ਮੁਆਫ਼ ਜਾਂ ਵਾਪਸ ਨਹੀਂ ਕਰ ਸਕਦੇ, ਭਾਵੇਂ ਆਰਡਰ ਸਾਡੇ ਕੋਲ ਵਾਪਸ ਆ ਜਾਂਦਾ ਹੈ।ਜਦੋਂ ਅਸੀਂ ਤੁਹਾਡੀ ਵਾਪਸ ਕੀਤੀ ਆਈਟਮ ਨੂੰ ਪ੍ਰਾਪਤ ਕਰਦੇ ਹਾਂ ਅਤੇ ਪੁਸ਼ਟੀ ਕਰਦੇ ਹਾਂ, ਤਾਂ ਅਸੀਂ ਤੁਹਾਨੂੰ ਇੱਕ ਈਮੇਲ ਭੇਜਾਂਗੇ ਤਾਂ ਜੋ ਤੁਹਾਨੂੰ ਸੂਚਿਤ ਕਰ ਸਕੀਏ ਕਿ ਅਸੀਂ ਤੁਹਾਡੀ ਵਾਪਸ ਕੀਤੀ ਆਈਟਮ ਪ੍ਰਾਪਤ ਕਰ ਲਈ ਹੈ। ਅਸੀਂ ਤੁਹਾਨੂੰ ਤੁਹਾਡੇ ਰਿਫੰਡ ਦੀ ਮਨਜ਼ੂਰੀ ਜਾਂ ਅਸਵੀਕਾਰ ਬਾਰੇ ਵੀ ਸੂਚਿਤ ਕਰਾਂਗੇ।ਜੇਕਰ ਤੁਹਾਨੂੰ ਰਿਫੰਡ ਪ੍ਰਕਿਰਿਆ ਬਾਰੇ ਕੋਈ ਸਮੱਸਿਆ ਹੈ, ਤਾਂ ਕਿਰਪਾ ਕਰਕੇ ਸਾਡੇ ਨਾਲ ਸੰਪਰਕ ਕਰੋ。 service@roymall.com ਜਾਂ Whatsapp: +8619359849471
Specifications:
- Can be welding 18650/26650/32650 lipo battery, it is portable, stable and reliable
- System voltage: 12V-14.6V
- Working current: 90-150A
- Suggested battery:1. 20-45ah Lead-acid battery with good performance and small internal resistance
2. 3.5-5.5ah 45C 3S aeromodel lithium battery pack
3. 30-35ah capacity 18650 battery pack
-This circuit with a 12V battery will become an energy storage spot welding machine for welding nickel pieces such as lithium batteries and nickel-chromium batteries. According to different configurations, the thickness can be about 0.1MM-0.15mm

Function Description:

After power on, press and hold the switch for 2 seconds to turn on
There are 4 modes, press and hold the switch for 3 seconds to switch to a u201cbeepinchs sound and finish
Level 1: Low power1, green light flashes once
2nd gear: medium power1, green light flashes twice
Level 3: High power1, green light flashes three times
4th gear: automatic mode
When the red light is always on, press and hold the switch to turn off the device.
NOTE:
If the battery is pretty good and the internal resistance is very low, and then there may be large current overload.
If you are not sure about your battery, it"s better to extend the wire by around 1 meter with 2.5u00b2 or 4u00b2 wire, then it will reduce the risk of power tube burnt.
Package Included:
1 x Main Circuit Board
2 x Input Wire
2 x Output Wire(with Welding Pen)
1 x Welding Components Kit
PayPal ਨਾਲ ਖਰੀਦੋ
Electronics Ranking

DIY Portable Battery Storage Spot Welding Machine PCB Circuit Board Welding Equipment Spot Welders for 18650 26650 12V

DIY Portable Battery Storage Spot Welding Machine PCB Circuit Board Welding Equipment Spot Welders for 18650 26650 12V

DIY Portable Battery Storage Spot Welding Machine PCB Circuit Board Welding Equipment Spot Welders for 18650 26650 12V

Customer Reviews

4.80 out of 5
See all 1234 reviews
Write a Review
  • All Reviews (1234)
  • Image ( 2 )
  • Video (0)
  • All Star
    • All Star(1234)
    • 5 Star (2)
    • 4 Star (0)
    • 3 Star (0)
    • 2 Star (0)
    • 1 Star (0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 04/07/2020

    After I assembled the board with beeper, capacitor and the cables it was not working. There was no power at the welding tips. When checking the boards circuit I found this: MCU output -> drives a PNP transistor -> drives the gates of the N-ch FETs. I post a photo of the schematic: It cannot work. The diode is assembled in wrong direction (the PNP transistor will never switch on) and even if it is reversed it cannot work. The PNP transisitor is always on then because the voltage after the diode can never be higher than MCU power supply (5V) plus diode forward voltage. I removed the diode, PNP transistor and the rest and replaced it by a PC817 optocoupler, after that the spot welder works as intended. (The original circuit may work for battery voltages up to maybe 7-8V but not higher).
    Did the manufactiurer made this change recently? Other users will experience the same issue like me...

    Comments (13)
    Show Original
  • 05/11/2020

    Minor assembly required with soldering iron. The Capacitor and Buzzer need to be soldered on, and leads have to be soldered as well. I put XT-60 on mine so I can power it with a large 5000mah 3S lipo, or use my Lipo charger in "power supply" mode.
    Very easy to do and board is marked for where the 2 items have to go. Assembled min in
    Excellent for spot-welding RC battery packs.
    Works on Nicad and NiMh batteries.
    Also works well for LiPo's. Make sure you lift the Lipo leads up, touch them together and then spot weld. Fold them back down when done

    Comments (3)
    Show Original
Show:
    12...30

    Total 0 pages

    Go to page

    Go
    Customer Q&As
    Can't find your answer? Ask a new questionorCustomer Service

    Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

    showing 1-30 of 74 |
    Show Original

    A part of the QA has been auto-translated.

    • 0
      Q: well this work with a 164amp 12v dc server power supply?
      A:
      The electronic power supply might fail if repeatedly short-circuited by the welding. Alternatively, there might not be enough short-term current because most power supplies will instantly shut down when they detect a short-circuit. Remember, the server power supply is designed to operate 164A while the terminals are at 12V, and is definitely not designed to provide 164A into a short-circuit - if the voltage drops towards zero (a short circuit) then the power supply will consider that is a fault condition and switch off. You really should just use the recommended battery, as that's cheaper and easier and proven to work.
      Answered by Coops on 23/03/2020Helpful (0)
    • 0
      Q: can i use car battery?
      A:
      I think that is OK. - Suggested battery: 1. 20-45ah Lead-acid battery with good performance and small internal resistance 2. 3.5-5.5ah 45C 3S aeromodel lithium battery pack 3. 30-35ah capacity 18650 battery pack
      Answered by Liltwas on 16/04/2020Helpful (0)
    • 0
      Q: Will it weld nicd sub c batteries
      A:
      I think that is OK.
      Answered by Anacardic on 04/06/2020Helpful (0)
    • 0
      Q: can you please upload a video on how this product should be used and the precedure of welding batteries using this product? thanks
      A:
      Switch function: press the switch for 1.5 seconds to turn on (green light flashes, low-power spot welding pulses are output every 3 seconds), press the switch for 1.5 seconds (blue light flashes, medium-power spot welding pulses are output every 3 seconds), press switch 1.5 Second (red light flashes, high power spot welding pulse is output every 3 seconds) Press the switch for 1.5 seconds to shut down.
      Answered by Spifit on 16/04/2020Helpful (0)
    • 0
      Q: can I use a 60Ah 400A Lead-Acid car battery with this?
      A:
      Good
      Answered by KazimAnil on 12/07/2024Helpful (0)
    • 0
      Q: Whats machine can work with 4s battery 14.8 volt 7.500 mAh 35C??
      A:
      diy spot welder
      Answered by Fayaz on 23/01/2022Helpful (0)
    • 0
      Q: can I use 4s lipos or just 3s
      A:
      working coltage is 12V,3S and 4S is OK.
      Answered by Bansil on 25/04/2020Helpful (0)
    • 0
      Q: I have a constant 12V output in any mode, a beep but no welding. Any idea how to solve it?
      A:
      Youshould use batteries with high amperage. It's in the description section.
      Answered by ahmetgurkancoskun on 16/08/2022Helpful (0)
    • 0
      Q: can I use psu smps with 12v 29amps?
      A:
      Very nice recommend
      Answered by nameguler on 01/05/2022Helpful (0)
    • 0
      Q: Is there a video or Utube of how it works?
      A:
      There is now a video in the product description that explains everything.
      Answered by 1nformatica on 19/05/2020Helpful (0)
    • 0
      Q: Can i use car battery? 12volt 70ah?
      A:
      12 was 90 a
      Answered by maykil20 on 23/10/2021Helpful (0)
    • 0
      Q: Does it include 2 welding pens?
      A:
      Yeah,as the picture, include 2 welding pens.
      Answered by Dayny on 17/03/2020Helpful (0)
    • 0
      Q: Is it COD?
      A:
      ok 10
      Answered by BG195457125 on 06/03/2022Helpful (0)
    • 0
      Q: Can I wield pouch lipo batteries?
      A:
      20A battery. may be 8s lipo
      Answered by TAURUSFPV on 28/09/2021Helpful (0)
    • 0
      Q: Can I use a 100 Ah 900A battery? Or is it an overkill?
      A:
      itested it by battery 45ah ; it work perfect ; see my video : youtu.be BWGcmCx7lx8
      Answered by BG523410112 on 20/02/2022Helpful (0)
    • 0
      Q: Can i use this circuit with 30A 12V Led Power Supply?
      A:
      30A is probably much too low. I haven't received the unit yet to measure the actual current but will do that when it arrives. I'm guessing that spot welding the metal strips this is intended for requires at least 100A, maybe more like 200A. One way you might be able to use the 30A supply is if you put a very large capacitance in parallel with the supply. The capacitor needs to have a very low ESR (equivalent series resistance). A 50,000uF, 15V, low ESR electrolytic capacitor might work but it may cost you ***** or more. To calculate the actual capacitance required, you need to know the required current and the period of the current pulse and assume a voltage change of about 1 volt, i.e. assume the capacitor voltage will drop from 12V to 11V during the pulse. C = (current x pulse period) divided by the voltage change. So if the current needed is 100A and the the pulse period is 5 milliseconds and the capacitor voltage change is 1 volt, then C = (100A x .005 seconds) divided by 1 volt = 0.5 farads or 500,000uF. That's going to require a bank of 10 paralleled 15V, 50,000uF capacitors. You might as well get a 12V car battery. I think it might be cheaper. But I could be wrong about the max current required.
      Answered by Danno on 18/12/2020Helpful (0)
    • 0
      Q: Is it ok to use this product with a 12v 20ah gel car battery?
      A:
      It is ok, but please check whether the circuit is working. The unit, which I received is faulty. It never could work since there is a severe fault of the circuit design. I had to correct this with major effort.
      Answered by Volker on 14/12/2020Helpful (0)
    • 0
      Q: I just received it, I connected it all normally and as soon as I connected it to the battery, it took out the Diy, it took out smoke and it didn't work anymore, I think they are defective, that's why they sold them cheaper than others, I bought them and they gave me the kind of problem
      A:
      getwell soon
      Answered by ahmetgurkancoskun on 20/07/2022Helpful (0)
    • 0
      Q: can I use a 12v car battery?
      A:
      yes you can
      Answered by Pavel Ponomarenko on 23/03/2022Helpful (0)
    • 0
      Q: Will this work well with 0.15mm nickel plated steel strips? Or is it not powerful enough?
      A:
      This barely works with 0.10 Nickel. This product is much better for 0.15 strips.... Item # 1686661 I use it with a 4S Li-Po battery.
      Answered by JayBee on 26/07/2020Helpful (0)
    • 0
      Q: can I use my car battery? or a simple 2S or 3S 2200mAh 20C lipo battery work?
      A:
      I used my old car battery and it works perfectly
      Answered by maxime287 on 31/01/2022Helpful (0)
    • 0
      Q: Will this work with 3S 4500mAh 45C lipo battery?
      A:
      Yeah,that is OK.
      Answered by Oth_zenGeta on 16/04/2020Helpful (0)
    • 0
      Q: I have a constant 12V output in any mode, a beep but no welding... Any idea how to solve it?
      A:
      '-*1) ( 319) ' '5
      Answered by Lammih on 22/11/2021Helpful (0)
    • 0
      Q: Is it work on battery 4s 14.8volt 7500mAh 35C???
      A:
      No, definitely not! A fully charged 4S has a no-load voltage of 16.8V. Max for this is 14.6V. A 3S is what you want. As a matter of fact, mine blew the input diode when I plugged it into a 3S battery. I had to replace the diode to get it working. This board is not very robust but it does work for 0.1mm straps.
      Answered by jjmusto on 06/02/2021Helpful (0)
    • 0
      Q: instruction for this unit?
      A:
      Youcan check the description section.
      Answered by ahmetgurkancoskun on 28/12/2021Helpful (0)
    • 0
      Q: Can I use a Li-ion battery 4s 9p?
      A:
      Idon't know, I haven't tried
      Answered by ahmetgurkancoskun on 09/12/2021Helpful (0)
    • 0
      Q: can I use 12v from 100amh lead acid battery?
      A:
      yes
      Answered by BG183716441 on 23/11/2022Helpful (0)
    • 0
      Q: Are there any instructions?
      A:
      yes there is.
      Answered by Pavel Ponomarenko on 23/03/2022Helpful (0)
    • 0
      Q: In another site I have seen using it and sell it with a capacitor 35V 2200μF solder it on PCB Board. Why in this one don't use this capacitor? Thank you!
      A:
      It makes no difference. the welder is unable to weld the thinest nickel strip. Avoid this rediculous product.
      Answered by Jim on 24/02/2021Helpful (0)
    • 0
      Q: can it use a 12v 7.2ah battery?
      A:
      Works well
      Answered by Ahmad Mohammed on 07/09/2022Helpful (0)

    ਮੇਰਾ ਕਾਰਟ ਕਾਰਟ (112)
    ਮੇਰੇ ਪਸੰਦੀਦਾ ਪਸੰਦੀਦਾ (0)